The way most stores do their loaner tool program is that you actually pay full price for the tool, and then get the money refunded when you bring it back. I've never heard of one pulling 'new' tools off the shelf, loaning them out, and then putting them back on the shelf as new. If I were you I'd contact their corprate office and let them know what was going on.
The fittings on all guage sets, and hose ends, are the same, regardless of what refrigerant your testing. The only thing you need to get for your set are the adapters that fit hoses and the R134A fittings on your vehicle, and they aren't usually that expensive. That said if you were just putting a little bit in, why not just use the el-cheapo low side hose that you can buy for a few bucks, or comes with the cans of DIY refrigerant. Personally I've got all the 'right stuff' to do the job also, but I keep it all in a Jobox that I set on the truck when I know I've got an A/C job to do. That hasn't kept me from being asked to put a little in a system, by a customer who knows I do that type of thing, when I don't have all my tools with me. In that case I keep one of the el-cheapo's on the truck just for those times. As long as you know about what low side pressure you should be running they do the job just as good as a full set of guages will.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
