Re: Thanks - re. Elec problem on JD 4100
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Glenn Simpson on June 30, 1998 at 02:48:11:
In Reply to: Thanks - re. Elec problem on JD 4100 posted by Clay Lynch on June 29, 1998 at 11:19:44:
: First of all thanks for the great replys from those
: who enjoy helping others. No comment to any derogatory
: replies I recieved bashing JDs. : I followed the advice of several here and found that the
: factory had not run down a ground wire in the alternator
: circuitry. As it got dirty, the wire lug made less and
: less good contact with the frame. The wire lug was dangling
: between the bolt head and the frame within about a 1/4" to
: 5/16" gap. Ran it down with the ol' socket and I'm good
: to go! Honest mistake at the factory. I'm just glad to
: have that scare over with such a easy sol'n. : Dealer supplied new head lamps at no charge. : Thanks again to all, good site ya got.
: Clay Pleased to hear you got it licked. It's nice to see the answers come back on this board. So often people post a helpful hint but never hear what happened.
Glenn
Follow Ups:
Post a Followup
|
