Posted by ss55 on September 07, 2013 at 16:25:58 from (173.19.101.220):
In Reply to: NEW gas standards????? posted by JD Seller on September 07, 2013 at 14:29:08:
About 15 years ago I took some evening classes on small engine repair. The instructor ran a local lawn and garden implement dealership with his dad and brother. I don't remember if that was before or after ethanol blended gas was mandatory here.
The instructor commented that the invention of the product "Stable" increased their business a lot. Guys stopped draining gas tanks before storing their small engines in the off-season. They just poured a few ounces of Stable in the tank and parked it. The next season many engines would not run right or would not start at all.
His business got to repair those machines or take them as trade-ins on new machines. His shop guys would clean-up the carburators, replace the gas with fresh gas and the machines would run fine again.
His recommendations to us for reliable small engines were: drain the gas tank before storage; change the oil on-time; and don't over-speed the engine RPMs. That has worked well for me.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
