Help....Why no Spark?

Posted by Dave on July 05, 1998 at 07:34:09:

I am working on installing a coil into a WD. The previous owner had made a minimal 12v conversion by just changing the coil. The 12v coil had a very weak, intermittent spark at 6v. I changed the coil to 6v and now I have no spark. I have -6v on one side. The points are opening and closing. Unless my point gap is badly off, I should have a spark? I am holding the coil wire about 1/2" off a sparkplug. I pulled off the condenser with no change. Thanks, appreciate any responses. Dave

Follow Ups:

• Re: Help....Why no Spark? Need firing order....Dave 10:04:54 7/05/98 (4)
  • Re: Re: Help....Why no Spark? Mark R. 18:28:48 7/05/98 (0)
  • Re: Re: Help....Why no Spark? Dave Kolbenschlag 10:32:29 7/05/98 (2)
    • Re: Re: Re: Help....Why no Spark? Kevin 14:18:32 7/05/98 (1)
      • Re: Re: Re: Re: Help....Why no Spark? Thanks Guys, Dave 19:24:28 7/05/98 (0)

Post a Followup