Re: Need A Game Plan.

Posted by Royse on October 10, 2013 at 18:42:17 from (69.36.58.178):

In Reply to: Need A Game Plan. posted by Bryce Frazier on October 10, 2013 at 18:28:50:

Looks like a 2N. Check out OldFordTractors.com

Main problem with ignition is the points.

Sometimes the square can coil goes bad, especially if the key is left on.

Take a jumper wire to hot wire it after you change or at least clean and

gap the points. That bypasses the failure prone key switch.

Timing is a piece of cake.

You take the two bolts out of the distributor, take it off and over to the bench,

put in your new points and set the timing right there.

Then you bolt it back on already set. The distributor only goes on one way.

There are no gears to have one tooth off, no timing marks to

use a timing light or anything like that.

The I&T FO-4 manual shows the procedure pretty well.

PS, buy good points! The cheap plastic rubbing blocks you get

from Tisco or TSC, etc where out in no time.

NAPA #CS35

Standard Ignition Blue Streak #FD-6769X

This post was edited by Royse at 18:44:55 10/10/13.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]