Re: Need help with international baler parts and problem

Posted by DeltaRed on July 14, 2014 at 06:45:31 from (65.100.145.84):

In Reply to: Need help with international baler parts and problem posted by jocco on July 14, 2014 at 05:05:06:

I hate to tell you this,but it's time for a newer baler.I've been there on a 56 baler(and also on a new holland 283).When they get to that point,it's time to replace it.The rest will not be far behind.The old baler has simply reached the end of it's lifespan.It's just 'used up'.IIRCyou need to remove all the strippers.Then remove all the teeth.Then remove the bearings on the tine bars and slide them out the little 'window'.The cam track Comes out last,after the 'cage' is completely disasembled/On the one I had,I cut out the entire end,removed/replaced the cam(I have a brand new cam track hanging in the shed),etc and then rewelded the end back on.The IH baler at best was marginal.NewHolland and JohnDeere are LOTS bettere machines with good parts support/availability.Do yourself a BIG favor and junk it,dont even mess with it,cut your losses and run....

Replies:

• Re: Need help with international baler parts and problem DaninKansas 13:26:07 07/14/14 (0)
• Re: Need help with international baler parts and problem DeltaRed 07:27:21 07/14/14 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]