Posted by Farmallmaniac on October 14, 2014 at 14:35:16 from (216.114.233.5):
I am having some issues with my farmall 300. Right now I need full choke to even keep it running. I did some searches and see that I should pull the fuel bowl off and clean it out and blow out the fuel jet. Also, check for good fuel flow.
Should my sediment bowl have a screen? Mine does not. I am getting rust particles in my bowl still. Any suggestions on cleaning it out without removing the tank? I plan on doing that this winter but I need this tractor now.
Another thing, The book says to turn out main fuel adjustment screw 5 turns. I don't think my MFAS will even stay in that far out. Also it is very very loose, so loose that just in normal operation it is constantly changing adjustment. I got a new lead packing to replace any tips or pointers as far as that goes?
I posted this hear because of the high traffic volume.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
