Posted by Geo-TH,In on February 17, 2015 at 11:05:40 from (184.16.165.4):
My Jubilee was converted to 12v before I got it. In 5 years had two starter drives go bad. Last one things sounded real bad. I ordered a 12v starter from YT, $147 shipping included. Installed it today and just like I thought one tooth on starter ring is more than half missing. Not sheared off, Chipped off.
Many will be many say they have gone for years using a 6v starter on 12v. Some even said I was making too much out of this.
I will say you are playing Russian rulet. Do you want to spend $147 on a nice sounding starter from YT, shipped in 2 days, or do you want to split the tractor and replace the starter ring?
Many will also say OHM'S LAW doesn't apply here. If you double the voltage, don't change the resistance, you will also double the current. Twice the voltage, twice the current, 4 time the power. I don't care if you don't think the 6 volt starter is producing 4 times the power. The starter drive can slam the teeth on flywheel and chip them. The pic is proof.
Do yourself a favor and buy a 12v starter. And if you recommend using a 6v starter, please warn them it's possible to chip a tooth off.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Grain Threshing in the Early 40's - by Jerry D. Coleman. How many of you can sit there and say that you have plowed with a mule? Well I would say not many, but maybe a few. This story is about the day my Grandfather Brown (true name) decided along with my parents to purchase a new Ford tractor. It wasn't really new except to us. The year was about 1967 and my father found a good used Ford 601 tractor to use on the farm instead of "Bob", our old mule. Now my grandfather had had this mule since the mid 40's and he was getting some age on him. S
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
