Posted by tired1 on April 18, 2015 at 23:48:51 from (199.3.212.125):
well my 4020's are about shot. I need to get something newer, but what ? don't want (cant afford) to break the bank. I need to pull a 12 foot swather, a jd 535 round baler, a 6 row jd 7000 planter and a 10 foot or 15 foot no till drill, and a 12 to 14 foot tamdem disk.
problem is i can find anything around !!
i would like a 4430 or 4440, but nothing. don't know much about red paint. one place has a 706 and i don't think it's big enough, another has a jd 4040 but i think it's about the same. seems like all the tractors in the last year have disappeared.
one place has a 3394 i believe, but when you go in reverese, it tings, salesman thought it was a tooth out of a gear, but makes no noise going forward, and the fellow that owned it used it that way for 2 years, but the salesman also said the tractors value is such it wouldnt be worth it to him to open her up and fix her (then what about me then ?)
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
