Posted by Foghorn Leghorn on May 18, 2015 at 07:14:29 from (66.168.52.146):
In Reply to: Motor oil again posted by Tom in Mo. on May 17, 2015 at 16:32:14:
My concern with all the oils now is how they have changed recently, and I am not happy about some of what I see. Especially for older gas engines with flat tappet lifters and cams, this newer oil without ZDDP would seem to be a problem. That includes older diesels now as well. This was an EPA mandated change for the newer stuff, but is a problem for the older.
I actually went TO Rotella for this reason, but discovered that the conventional rotella oil redeuced this as well. Running with Rotella synthetic t6 5-40 in my Oliver 1655, but that is only used in the winter. Seems OK. Just put Rotella semi synthetic 10w30 in my allis C. Used in summer for mowing (was using mobil conventional 10-30.
On my 87 BMW, I am using Mobil1 15-50. Only run that in the summer. That does still have ZDDP.
This will be an even bigger issue over time. The cant take our older stuff away, so they are trying to make them unuseable. They will be successful unless we fight back.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
