Posted by Hobo,NC on July 27, 2015 at 18:57:47 from (75.138.197.162):
In Reply to: Pickup AC Repair posted by dhermesc on July 27, 2015 at 08:22:17:
I don't know the circumstance they had to work under...
Did you ask for a wham bam thank you Ma'ma retro fit... I got the feeling that's what you got weather you ask for it are not...
The only recourse I see is a refund for the refrigerant if they missed the leak.
You owe them for the parts to retro and there time..
If it needs a condenser now it needed it then unless you somehow knocked a hole in it after you picked it up...
If I thought I missed it the refrigerant and the labor to evacuate and charge would be free with a condenser and accumulator replacement.. You would own me the labor to replace the condenser, accumulator and associated o-rings,,,may as well get'em all while we are there and take a look at the expansion tube...
While we are on the expansion tube it should have been checked at the time of the retro fit the tube tells a story... If its clean its a safe bet to move on,,, If its contaminated all bets are off...
There are plenty of folks that think they know AC but few that know how to do a professional AC repair the way it should be done and live with good service....
I have keep up with AC repairs for a long time you have to adapt and change as systems progress... Some things you buy into and some you don't, its what works for you...
You have to remember the system is 25 years old its out lived its projected life span, anything may go out at any moment. Most have never worked on a R12 system and all they have to go on is a rapid-fix in a box... I would look for someone that has keep up with retro fits as they came about there are a few tricks that can be done to make it cool as good as R12 are better in some cases...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
