Posted by FarmerJoeVT on August 11, 2015 at 17:32:00 from (75.69.30.9):
Good evening,
I recently purchased a Case 430ck backhoe / loader. After running her fine for 2 days, toward the end of the second day it started to make a grinding sound when attempting to put her into gear and then forward or reverse or vice versa. We are able to do them individually without problem, but not together.
Example: Put it into 1st gear but when we move the selector lever for forward or reverse it wont pop into place with a grinding sound. Or with the gear in neutral, we can move the selector into forward or reverse, but as soon as we attempt to move it into 1st gear it does the same. Its almost if if the clutch is still spinning, not allowing it to go into gear.
My brother posted this on the forum a couple weeks ago (http://forums.yesterdaystractors.com/viewtopic.php?t=1231960) and I am expanding on it, with a desperate plea for help. :) So if anyone can give any advice, troubleshooting steps, and suggestions it would be greatly appreciated.
Here are some videos we did when the issue first started to help you all hear and see what we are.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
