1944 FarmAll "M" Carb
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by ANdy Grinthal on September 01, 1998 at 10:08:54:
Looking for some advice here....I am rebuilding the carb on my "M". I purchased a rebuild kit from CT Farm & Country and all seems ok except for the bushing for the throtle valve shaft. I had to rip up the old bushing to remove it - however as I look in the service manual I see there is supposed to be two holes in the body that lead to the shaft - yet the bushing I got with my rebuild kit has no hole!..I can't say wether the old one had holes in it since I had to rip it up to get it out. so my questions here...do I Drill holes in my new bushing? Any info out there on just what and how the economizer slot in the throtle valve shaft should be set up? Also (seperate question) on the bottom of the carb bowl there is supposed to be a drain for excess gas discharged from the manifold...I believe mine is clogged (it's supposed to have some fileter in it to keep dust from entering...) I didn' get anything for that in rebuild kit...DO youdrill a fine hole to unclog it?
Appreciate any comments anyone can give..WOuld like to get this thing running for the Fall...Andy
Follow Ups:
Post a Followup
|
