Re: Re: Re: Re: Convert Farmall M to 8-volt?
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Ludwig on September 29, 1998 at 12:42:14:
In Reply to: Re: Re: Re: Convert Farmall M to 8-volt? posted by Lee Bradley on September 27, 1998 at 09:24:43:
I'm pretty sure it's the regulator, if I leave it alone and take the neqative wire off of the batt, the engine shuts off. If I excite the field and have somebody take the negative wire off the engine stays running....Sounds like the reg to me. : You may not have a charging problem. If the battery is charged to : 8 volts the 6 volt system won't charge until the battery voltage has : dropped to 6 volts. : To adjust the regulator; remove the cover, identify the field coil : (it's the coil with fine wire windings, the heavy wire coil is the : low voltage cut-out relay), the coil contact points have a tension : adjustment that you must adjust (could be a screw or a metal tab), : with the engine at a fast idle and the lights on adjust the regulator : so you have about 9 volts at the battery. Make adjustments with the : engine stopped and battery disconnected unless you like fireworks and : burned up generators/regalutors. Also small adjustments and don't let : system voltage exceed 10 volts as field coil burn-out soon after. : As has been said here before the 8 volt upgrade is a nice compromise : between slow cranking 6 volts and a major conversion to 12 volts. : Good luck and keepem runnin, : Lee
Follow Ups:
Post a Followup
|