Re: JD 50 clutch stuck engaged
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Chuck Westerfield on September 30, 1998 at 21:08:59:
In Reply to: JD 50 clutch stuck engaged posted by Charles on September 30, 1998 at 11:58:01:
: My "50" has a strange clutch problem. It sometimes will not disengage (which is very disconcerting when you are heading for a solid object like a barn wall. Don't ask how I know). I have put in new discs and adjusted the linkage so it takes the recommended 40-80 lbs. to "snap" in. It will freely operate back and forth when the engine is stopped. : But when running, I can yank back on the lever to where the pulley brake is dragging, but the clutch stays engaged! : What is sticking here, the three operating bolts, toggle bolts, or something else? : Thanks for any suggestions. First, try this...loosen the adjusting bolts and retighten to where the clutch engages freely and will stop with the brake....then run some like this...tighten the bolts some additional...till you get it to freely working..be shure the brake is adjusted properly....
Follow Ups:
Post a Followup
|