Posted by DeltaRed on December 04, 2016 at 19:53:48 from (65.100.147.119):
In Reply to: Furrow Wheel Thoughts? posted by Bryce Frazier on December 04, 2016 at 16:13:13:
Bryce,that M will handle that plow nicely. However,because your tractor does NOT have 'draft control',you're going to have to use a depth regulateing 'device'. The easiest/best way is to use a combination of stroke control/limiting collars. to get the right depth.I've plowed a lot of ground with my SM,pulling either a 2 bottom,or 3 bottom rollover.By useing stroke collars you do not even need a gauge wheel. the tractor carries the plow. With a gauge wheel and no depth limiters the tractor only pulls the plow. Use of limiters cam make a full gear difference,plus a better plowing job. You really dont need a furrow wheel. Landsides in good shape,and the 'draft' set right it will follow straight line with no side draft. Call me if you want. You still have my number?
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Farmall 460: That's My Girl - by LeAnn R. Ralph. How many sounds can you think of that are as familiar to you as your own breathing? What about the hum of your refrigerator? Or the thump of your clothes dryer? Maybe the engine of your car? You hear those sounds every day, and you don't think much about them, do you. I can think of a few common, ordinary sounds in my daily life, too.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.