Posted by Mo in NE Tx on June 21, 2017 at 18:15:19 from (47.182.2.88):
In Reply to: B Farmall with mower? posted by Mo in NE Tx on June 20, 2017 at 17:14:21:
I turned the engine over by hand, it was too easy, no compression at all, I have a spare engine that is in good shape that I'll probably swap out. In the meantime I took the mower off and mounted it on my "A" Farmall. Just 6 bolts and bingo, NOT. I had to adjust the length two inches to clear the front tires, I had 14.9X24 on it and had to change them back to 11.5's to clear the deck. Then had to change the pto from the "B" to the "A" since the "A" has the larger pto shaft and the mower uses the smaller one. What I thought would be a snap, took all day, but I got it done and will add trans oil tomorrow and try it out. Got one grease zert that won't take grease, but not a problem, can fix that in a jiff. Happy mowing now.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
Latest Ad:
1945 Farmall wide body gas with pto and front plow. Runs good but needs new points.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
