Re: Re: Re: Ford NAA Hyd.
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Tim C on November 22, 1998 at 09:16:37:
In Reply to: Re: Re: Ford NAA Hyd. posted by GEO on August 12, 1998 at 17:57:19:
: : : I have a Ford NAA that has problems with the hyd. : : : system when it gets hot. Has the hy-trol valve pump : : : which I think is the vane type. Looses all lift when : : : the tractor is worked hard as in brushhoging thick : : : vegation. Could the problem be the relief valve, or : : : worn out hyd. fluid? Or would the problem lie in the pump, : : : such as weak seals? There are no noticeable leaks anywhere : : : around the system. Would like any thoughts before I : : : go to the expense or having the pump rebuilt. One last thing, : : : if the pump needs rebuilt, how much money should I : : : expect it to cost? Thanks to all who reply! : : : : It is difficult to say without watching it operate but I doubt it is worn out hydraulic fluid. I've seen the Hy-Trol valve on tractors with both the vane- and piston-type pumps. The vane pump was found on models through ROUGHLY the first half of '53 when the piston pumps took over. Many vane pumps were replaced by piston pumps as the standard replacement part was the piston pump. : : If I were you, I'd start by replacing the pressure relief valve and all of the seals in the lift cylinder and draft control mechanism as they are much cheaper than pumps to replace or rebuild though not necessarily easier. We've replaced the seals several times and the valve once on our '53 but have yet to do anything to the pump. : : The I&T shop manual helps a lot in dianosing the problem and helping you through the fix the first time. Good luck. : Just to throw in my two cents worth. Might check and make sure that you have at least 80 weight mineral oil in the hydraulics and not current hy-trans fliud. : Hi, Matt, hope you have had more rain than we have had. : GEO
Follow Ups:
Post a Followup
|