Posted by philip d on February 05, 2019 at 15:10:49 from (96.44.72.9):
All the trash talk about backfeeding power during an outage I thought I’d share how simple the one is were hooking up for my cousin. He still has a 60A service entrance and that’s still all he needs. We added in a second panel ,it’s a Square D panel with a manual generator lockout. We added a 60A breaker to the old panel and that feeds a 60A on the bottom left of the new one. All the essentials from the old one are being removed and added to the new one. Non essentials ex. dryer are being left on the old one. On the bottom right of the new one is another 60A that will run to a weather proof twist lock female receptical outside to plug the generator into. There’s a steel round wheel between the two bottom ones with a notch in it only allowing one to be turned on at a time and both have to be off to move the notch to the other breaker. I’m not sure what it will end up costing but it looks like a really simple fool proof setup for safety sake.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: 1951 Farmall H - by The Red (John Fritz). I have been a collector of Farmall tractors since 1990 when I first obtained part of the family farm in Eastern Indiana. My current collection includes a 1938 F20, 1945 H, 1946 H, and the recently purchased 1951 H. This article will focus on what I encountered and what I did to bring the 1951 NEAR DEATH Farmall H back to life.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.