Posted by INTIMIDATOR 3 on September 15, 2019 at 18:19:49 from (172.58.109.140):
I have one more thing to say before I go and I won't bother you gentlemen anymore. Probably won't believe this but. I went out and done drilling with my attachment idea. I was drilling with 8 inch auger think it's 42 long or something. Dirt dry, with just a little Clay mixed in. I could drill from start to finish in 60 seconds with out having to stop because my auger was stuck, didn't have to go up and down every 6 inches to make sure I wouldn't get stuck. I started my P. T. O. dropped my 3-point drilling attachment the auger caught like always but now I don't have to stop drilling to get my auger out because it doesn't get stuck. I pull up once to clean hole. Down again with our stopping, clean hole again. I'm done! It used to take me 15- 20 minutes or more to drill one hole because I had to work my stuck auger out. I'm thinking from 15-20 minutes to 60 seconds is pretty good. Every situation is different and all soil is different. Have a good day!
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
