Posted by big tee on April 29, 2020 at 07:01:53 from (199.120.66.180):
Right or wrong, time will tell--Unheard of in NE Iowa to be done with corn in April! The old saying--"Plant Early-Plant Often"--When I was a kid my Dad wouldn't start until the 2nd week in May--Hybrids have changed. Last year we ran that Vertical tillage machine I built over most of the previous years corn stalks except for one field--The trash would barely go through the old Deere 1100 field cultivator but when we got in that no-till it turned into a 42 ft. dump rake! So we got the old Deere 20 ft. BW disc out and disced it--Son thought it looked good so I was stuck in the disc for the duration .He said "NO MORE NO-TILL"--Big yield lag.---Tee View from the Deere 4630--Discing Wife ran the 8760 and the FC. Light soil--rented farm I got to run it on about 60 acres--it is the Wife's Deere
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
