|
Tractor Talk Discussion Board |
Re: Cub Cadet 1641 won't cut
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Todd Markle on December 23, 1998 at 20:03:26:
In Reply to: Cub Cadet 1641 won't cut posted by Mike on December 22, 1998 at 14:16:07:
Mike, All of the other postings are good, but you may want check the engine RPMs. If you can find someone with a photo tach you could check the engine rpms against the spindle pulley speed to see if the belt is slipping also. The engine should run at 3600 RPMs no-load. You definetley
want the front of the deck lower-read your owners manual, it tells you how to level the deck.
Follow Ups:
Post a Followup
|
