Posted by RedMF40 on August 25, 2023 at 19:02:06 from (172.58.243.159):
Thought I'd check in before heading to bed. Although Smokey and the Bandit's on tv so I might have to hit the hay a little later than usual.
Back on topic: A while back front right brakes started smoking on my '99 F250 SD. Made it home ok, not a total meltdown but they got pretty hot.
Replaced the brake hose on that side, drove for another 200 miles or so. Then last weekend I went to pick up some steel for a project. A few miles from home the left front brakes started smoking. I should add everything is in good shape both sides. Plenty of pad left, rotors look good, calipers look as good as you'd expect on an old truck.
Replaced the brake hose on the left side. Haven't driven enough to say if the problem is fixed but I think both hoses failed at about the same time so I should be good until the next thing breaks.
Just letting you know in case this helps someone else with a similar problem. Looks like the movie is winding down, the Bandit is heading up to Boston for some clam chowder.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
