Tractor Talk Discussion Board |
Re: Re: Heating A Pole Barn
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Farmer/Paul on March 21, 2002 at 05:09:44 from (216.8.151.81):
In Reply to: Re: Heating A Pole Barn posted by Dave_Id on March 20, 2002 at 19:31:38:
I have a 40 X 56 foot (14 ft sidewall) work shop insulated and for me heating with corn, wheat and corn is the cheapest heat I can get. I live in Southern Ontario and at times it can get quite cool. I have no problem keeping my shop at 60 degrees. I have modified my stove so that my efficency is way up (so much so I am using a 3 inch black plastic pipe for a chimmney. About 2-2.5 pounds per/hr will keep it nice and warm in 35 degree weather. I have used waste grain from local elevators (free) and grain that could not be sold because of poor grade ( really cheap). The advantage to this type of stove is there is no smoke or smell, no ashes, no wood pile,the heat out put can be controlled, and there is no need for and expensive SS chimmney pipe. It is also a kick when people take a real close look at my wood stove
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|