Tractor Talk Discussion Board |
Re: Drive Training
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tom on March 30, 2002 at 20:40:54 from (155.212.223.161):
In Reply to: Drive Training posted by Buck on March 30, 2002 at 18:22:10:
Unless you have a reason to have the tractor narrow, turn the wheels dish out and put the rims on in such a way that the tractor is fairly wide. You can switch the rim/tire side to side to keep the tread pointing in the right direction. Don't take turns in third too fast. For sharp turns at low speeds use the inside brake to hold the inside wheel and help the tractor make a sharp turn. Mostly you start off in the gear you want to use, it is difficult to shift while moving and not grind the gears. Try to get an owners manual. Change the oil in the final drives, transmission,steering box, air filter, and the engine, although most people do change the engine oil now and then, but do the filter too. Oh, the oil in the pto if it has one on the back of the differential.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|