Tractor Talk Discussion Board |
Re: What kind of a regulator is this one ?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Amateur Mechanic ... working fine now !!! on September 14, 2002 at 10:22:48 from (209.47.89.130):
In Reply to: What kind of a regulator is this one ? posted by Amateur Mechanic on September 13, 2002 at 07:47:35:
I thought maybe I would start with the easiest thing to test, that being the ammeter. I hooked up one that I knew was working and everything seems fine now ... the system is charging and working well. Meanwhile, I found out locally here that this regulator is called a vibrating voltage regulator ... the one winding is the cutout relay and the other one controls voltage. As mentioned below, it is indeed a 3rd brush generator and the basic setting for amperage current output is done inside the generator via the 3rd brush location adjustment.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|