Tractor Talk Discussion Board |
Re: Planting Crops
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Shane on February 27, 2003 at 15:38:01 from (216.241.134.182):
In Reply to: Planting Crops posted by T_Bone on February 27, 2003 at 03:59:38:
Here in northern IN we have no-tilled both soybeans and corn for over 10 years. The first couple of years yields sag but will increase after the soil begins to build itself up. We farm all types of soil from beach type sand to muck and heavy clay. It works for all types of soil here IF you address the soil at the correct time. Our yields are no more or no less then the neighbors are and we only make one trip to plant. We use a burn down for beans then spray only once after that with Clearout (cheaper form of Round Up) unless there is a huge amount of weed pressure. You have to wait a little bit longer to spray than you might think to be successful at this style but I assure you it works for us. Just because there are a few weeds present doesn't mean it is time to spray. Pretty much the same program for corn too. We don't have hardly any weeds to begin with in the ground going to corn so only some fields get a burn down. Due to the use of Clearout the year before on the beans. Also our wet spots seem to disapper every year. There are places where you were sure to need a tractor to pull you back out now most of them are passable. Even the clay no longer scares me, unless it rains a bunch! It works here for us but it isn't for everybody. Hope this helps. Oh yeah, as far as the plants being a different color and uniformity as they grow, it is true but after the no-till has been established this lessens. Take a yield test and you will find out they may look different but that yield will be very close. Sorry for such a long post.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|