Tractor Talk Discussion Board |
Re: Re: IH 450 pipe red runs rough
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob on February 03, 2004 at 06:28:36 from (66.163.134.177):
In Reply to: Re: IH 450 pipe red runs rough posted by RAB on February 02, 2004 at 23:08:07:
RAB, In "#2.)", you state "if point opening duration is too short, then the points gap should be decreased ". This is backwards. If the point opening duration is already too short, and you decrease the point gap, the points will open later and close sooner, so the point opening duration would become even shorter. Dwell is a measure of the rotation of the distributor cam, in degrees, that the points remain CLOSED between each spark. Dwell IS just as important on this low RPM tractor engine, because it is an indication of AVERAGE point gap, and, if you know the spec. for your engine, it allows the points to be set very accurately. If you know the factory spec's for dwell, and set your points accordingly, the gap will be correct. Another good feature of setting the points with a dwell meter is that there is no chance that any oil residue that may be on the your feeler guage is going to contaminate your new breaker points.
Follow Ups:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|