Re: Rims

Posted by mike on July 19, 2004 at 12:47:38 from (64.136.26.227):

In Reply to: Rims posted by Brad on July 19, 2004 at 07:59:01:

is it the older style rim that is held in place w/ clamps? If so go to the junkyard and get a couple of 16" dummy spares, like something off a crown vic, big caddy or other full sized car. Grind welds off center w/ a die grinder and knock the center out w/ a banger. Will go right onto your hub w/ your wedges.If it is the newer type with the "loops" you will have to cut them off your old rims and weld onto new project.not a big deal, have done it several times

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Rims Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]