|
Tractor Talk Discussion Board |
Re: Is this safe or not ???????
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by markct on August 25, 2004 at 06:38:05 from (68.236.75.163):
In Reply to: Is this safe or not ??????? posted by john in la on August 25, 2004 at 06:06:46:
i honestly have done almost the same thing, but i would not do it the way he has it there, the timbers could easily kick out since they are on asphalt, but if they were on dirt as i have always done then they could sit into a little hole and they wouldnt be able to kick out, i also usualy used heavier timbers and would have spaced them further apart, like closer to the ends of the vehicle. everyones image of safety is different but i personaly would feel safe working under that vehicle if there was a way to keep the timbers from possibly slipping on the asphalt
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
