Tractor Talk Discussion Board |
Re: Hauling Ford 8N with small pickup
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by OGGIE on September 04, 2004 at 19:26:33 from (162.40.166.180):
In Reply to: Hauling Ford 8N with small pickup posted by Doug in Minnesota on September 01, 2004 at 18:51:45:
fIRST TIME IN THIS FORUM , VERY INTERESTING. FIRST LET ME SAY THIS WOULD BE A VERY FOOLISH THING TO DO NEVER MIND IF IT'S LEGAL OR NOT. NEXT THING A NISSAN PICKUP IS ABOUT THE MOST ANEMIC THING I'VE EVER DRIVEN V6 OR 4 CYL. AND IF YOU GET INTO HIGH ALTITUDE YOU WILL THINK IT IS RUNNING AT HALF POWER . I WAS A TECHNICIAN AT A NISSAN DEALER IN LARAMIE WY. 7200 ft.AND PEOPLE PASSING THROUGH WITH TRUCKS AND PATHFINDERS PULLING TRAILERS WOULD COME IN ALL THE TIME SAYING THEY HAD NO POWER. ALSO WITH THE SINGLE AXLE YOU ARE GOING TO WRECK SOMEWHERE ALONG THE WAY I WOULD BET ON IT AND I WOULDN'T BET AN ANT COULDN'T EAT A BALE OF HAY.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|