Re: Viton Needle Valve

Posted by Bus Driver on October 17, 2004 at 07:56:16 from (66.226.37.89):

In Reply to: Viton Needle Valve posted by dhs on October 16, 2004 at 19:55:05:

One solution might be to shut off the fuel and let the carb run dry, stopping the engine. The needle would not be raised during the storage period and probably would not be stuck closed. Another thing would be to coat the Viton with a silicone compound. If you use the fuel shutoff method, be sure to shut off the ignition after the engine stops. Failure to do so will result in another non-starting problem.

Follow Ups:

• Re: Viton Needle Valve John *.?-!.* cub owner 19:16:47 10/17/04 (0)
• Re: Viton Needle Valve dhs 17:55:07 10/17/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]