Re: Snapping snowblower sheer Pins

Posted by JT on December 10, 2004 at 07:13:41 from (69.220.199.69):

In Reply to: Snapping snowblower sheer Pins posted by Snow and lots of it on December 09, 2004 at 18:29:58:

As the others said, you probably have a loose hole in auger shaft. Try puting new bolts in and then tighten, really tight. If that does not help, as Willy said, drill a hole farther down the shaft, don't put it close to the other hole or you will weakin the shaft and then it will break in two.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]