Tractor Talk Discussion Board |
Re: Fluid in tires
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Leroy on January 02, 2005 at 05:00:13 from (216.255.39.235):
In Reply to: Fluid in tires posted by Crem on January 01, 2005 at 16:04:29:
It would be impossible to get the fill weight above center of gravity so that is a moot point, and you want the tires geared to the ground as completely because if there is that slip that some want then there is also that slip when you are going downhill and putting the brakes on, the wheels stopped and you are sliding on down into that fence, building, creek or other object, load both to valve level turned up to top and you may also need aditional cast weight to ancre tthe tire to the ground on those hills, weight is safty, no weight is dangerous! Valve level is normal and to get above that up to 100% takes special tools with some tires having been filled 100% but for ground shock you need some air in the tire to absorbe the shock
Follow Ups:
Home
| Forums
Today's Featured Article -
Check Your Coolant - by Bill Radford. Great tips on how and when to check the coolant in your tractor.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|