Re: How do you plow snow with your tractor??

Posted by Jerry Cent. Mi. on January 23, 2005 at 13:36:05 from (205.188.117.7):

In Reply to: Re: How do you plow snow with your tractor?? posted by just on January 23, 2005 at 12:34:56:

I have a Ford 860 with a loader. I had a spare 3 point rear blade and I cut off everthing down to the swivel plate. I the took a heavy piece of chanel iron long enough to weld brackets on that would pin up to the arms of the loader and welded it to the swivel plate. I then welded another piece of chanel iron that was high (little over a foot) enough to weld a 1 inch bolt on and another bolt was welded to the loader in a location that would accept an adjustable top link. I now push the blade instead of pull. Had to add feet to stop it from digging in but it sure does the job.

Follow Ups:

• Re: How do you plow snow with your tractor?? ken macfarlane 06:37:36 01/24/05 (2)
  • Re: How do you plow snow with your tractor?? Brian in NY 07:01:21 01/24/05 (1)
    • Re: How do you plow snow with your tractor?? Hoosier JD 15:49:22 01/24/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]