Tractor Talk Discussion Board |
Re: What is a 1,000 rpm PTO for?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by buickanddeere on February 24, 2005 at 17:53:29 from (192.75.48.150):
In Reply to: Re: What is a 1,000 rpm PTO for? posted by HarryG on February 24, 2005 at 14:59:50:
Largest 540 rpm pto generator I've seen is the 60KW NorthStar. That's 90HP which is plenty but surge loads when starting large motors will take all the HP the tractor has. Too large for 540 rpms truth be told if operated near full capacity. Usually 50KW is the largest 540 and the 30,40 & 50 KW's are usually offered with 1000rpm shafts. At the tail end of two cylinder Deere production. The 430,435,440,530,630 & 730 could be ordered with a 1000rpm pto. The 840 industrial units had a 1000 output starting serial number 8400900. No more than 300 of those ever made. Mother Deere also sold field installation kits to internaly convert the 20 & 30 series. They also sold the external gear box rpm changers and longer drawbars. I would enjoy running across some of that 1000rpm two cylinder stuff.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|