Tractor Talk Discussion Board |
Re: Choices on beginner Lawn tractor
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Nolan on March 10, 2005 at 03:32:40 from (167.102.133.164):
In Reply to: Choices on beginner Lawn tractor posted by Monte Fontenot on March 09, 2005 at 21:54:06:
I've had several V-twin B&S over the years. Pretty consistently they've had lousy carburetors and run very rough at idle and low rpms. B&S may have fixed that in recent years. On a general note, having nothing to do specifically with these machines: 1. Consider turning radius. Particularly a zero turn radius machines. If you're going to be circling trees and manuevering around sheds and garden plots and such the turning radius of a machine becomes very significant. The wider a turning circle the more you're going to need to use a hand mower, and that's just a pain. 2. Consider how it shifts. The harder it is to shift the less willing you'll be to do it. Those variable speed hydrostat units are wonderfull, and you'll change speed and reverse in a heartbeat, where with the hand lever type, you'll find yourself doing all kinds of things to avoid shifting. 3. Consider weight balance if you've got slopes or want to push snow. Front engine machines do very poorly on hills and such, and are a real bear to lift out when they get stuck in a hole or such. A rear engine unit has much better traction. It also has a much lighter nose. 4. Make sure deck width is right for you. I like large decks also. But, it limits where you can go. If you've got lots of areas where you need to snake a mower through, a big deck prevents you from doing the job. There's a whole lot of my yard I can't do with my 44" deck.
Follow Ups:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|