Re: Changing Blades on a King Kutter Rotary Mower

Posted by Nor. Al. on April 24, 2005 at 18:42:53 from (12.181.29.28):

In Reply to: Changing Blades on a King Kutter Rotary Mower posted by lmcclue on April 24, 2005 at 16:32:49:

clue I have a king cutter and there is about a 2"hole in the top across from the gear box ,you take a 1 1/8 " socket and stick on the nut and turn it , you don't have to hold it from the bottom as the bolt has a keyway that sticks to the flywheel or disk. You may need someone to lay down and hold bolt in place in the keyway until you get tap and lockwasher started .I like to use an angle grinder without taking the blades off.Good luck !

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]