Tractor Talk Discussion Board |
Re: HELP - 48 AC WD TUNE UP INFO NEEDED
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Glen in TX on July 15, 2005 at 13:08:15 from (65.249.225.40):
In Reply to: HELP - 48 AC WD TUNE UP INFO NEEDED posted by CLAY RANDALL on July 15, 2005 at 08:08:31:
Some tune up specs in left hand columns here and they have some manuals on here too. Do a search on the AC forum for lots of info too or just ask there. If you have the FM-X mag there should be a mark on the magnet shaft gear that aligns with the "C" mark on the fibre rotor gear. Then get your engine on TDC on #1 front cylinder and line up the rotor with the tab in the cap at about 11 o'clock to time the mag to engine. Set points on the X mag to .015". On the FM-J mag align the mag gears the same way... C to the gear mark for Clockwise drive mags and A to the mark for Anti-Clockwise mags and set points at .020". There was some good AC info at this also: http://dueyschutter.freeservers.com/photo6.html If you need more help let me know.
Follow Ups:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|