Tractor Talk Discussion Board |
Re: CASE 245 TRACTOR
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by nastro34 on August 24, 2005 at 16:37:27 from (70.105.91.216):
In Reply to: CASE 245 TRACTOR posted by George Grams on August 14, 2005 at 14:40:06:
Funny to read this post, when I bought mine about five years ago I had not luck finding any informtion either. I bought mine with 1100 hours on the clock. It was a local original purchase and trade in. Mine is a 4wd drive, had the original tires etc. I also bought land and built a house. This was the single best purchase I have made. I have 6 acres with a 1 acre pond, and this little tractor has been used for every task you can think of. I have had no issues at all except issues I have cause. Example: I use the tractor and mower to cut down the cattails on the edge of my pond when pond is frozen. Last year the ice broke, tractor rolled over on it's side in the water and kept on running. This resulted in the throw out bearing locing up and the starter drags a little. I have a factory front loader on mine which I have used for everything. If you do not have a loader get a boom pole for the rear, it works great for lifting anything you can not. They make many versions of back hoe attachment for digging, the front loader does not work the best at this.Don't get me wrong it will but it takes twice as long and it is harder on the tractor. I have not regrets, good luck.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|