|
Tractor Talk Discussion Board |
Re: Re: Re: Re: Ford 4000 Stalling,
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Terry Bartlett on June 07, 1999 at 19:45:44 from (205.148.219.237):
In Reply to: Re: Re: Re: Ford 4000 Stalling, posted by ltf on June 06, 1999 at 20:18:21:
Today I changed the switch. Before, I would get power to one side of the switch and when I switched it on, I got no voltage to either side. I also cleaned the junction box being I was getting some bleed over voltage to the dead side without the switch being on.
I got a postive reading at the distibutor and to one side of the coil. When I turned the switched on, I got voltage to both sides. I also got voltage to the push button startor switch which I was not getting before.
I have also charged the battery today and plan to testing the cells tomorrow afternoon. I am going to try to start it tomorrow. All the reading appear ok so far, but I have a feeling you may be correct about the battery. I am going to order a new wiring harness while I'm at it. I am also considering changing over to a 12 volt system, what do you think?
Follow Ups:
Post a Followup
|
