|
Tractor Talk Discussion Board |
Re: Tedder
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Wrenchbender on June 14, 1999 at 20:15:27 from (209.240.200.56):
In Reply to: Tedder posted by Philip Hensley on June 13, 1999 at 12:00:23:
There are roll pins that hold things in place.One pin holds the wheel assy. on and lets it swivel,another holds the casting that locks the wheel in position after you remove those there are shims and needle brgs. on the shaft, be sure to keep track of them,then the rotor should slide off.
Follow Ups:
Post a Followup
|
