Hooking up a Motorola Alternator

Posted by JackT on November 14, 2005 at 15:47:01 from (4.228.126.8):

I have a single wire 84 amp Motorola alternator I want to mate with a small Briggs engine for off-grid battery charging. I had the alternator tested at a auto parts house and it tested fine. I can't get any juice out of it with the Briggs engine though, no matter how fast I run it. Its got 4 studs on it--GND, REG, OUTPUT, and STA. The solid state regulator is connected to the REG and GND terminals, I hooked the battery to the OUTPUT and GND, and left the STA open. I've been told that's just unrectified stator output and doesn't need to be hooked to anything. Suggestions?

Thanks

Follow Ups:

• Re: Hooking up a Motorola Alternator RodinNS 07:16:57 11/15/05 (2)
  • Re: Hooking up a Motorola Alternator JackT 13:17:08 11/15/05 (1)
    • Re: Hooking up a Motorola Alternator RodinNS 17:46:39 11/15/05 (0)
• Re: Hooking up a Motorola Alternator Hermit 18:18:29 11/14/05 (0)
• Re: Hooking up a Motorola Alternator Ray 17:41:31 11/14/05 (0)
• Re: Hooking up a Motorola Alternator bfloyd 17:15:58 11/14/05 (0)
• Re: Hooking up a Motorola Alternator doogdoog 16:42:32 11/14/05 (1)
  • Re: Hooking up a Motorola Alternator ebbsspeed 19:39:26 11/14/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]