Tractor Talk Discussion Board |
Re: Diesel Spill
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by James2 on November 24, 2005 at 09:02:39 from (207.179.239.101):
In Reply to: Diesel Spill posted by B. Carll on November 23, 2005 at 18:00:45:
This is an issue at work because we operate experimental machines. Small spills can be left, the soil microbes will eventually eat the carbon up, although any heavy metal additives will remain. I'm not member of the Hazmat response team, but I believe a couple of gallons doesn't require cleanup, seems like the trigger point is over three gallons, but I could be wrong. The big problem is if it happens several times, since you are in a fixed location. You shouldn't have tried to use detergent to emulsify the fuel which could allow it to be carried deep. Like others reported, for large spills the dirt is removed and incinerated, which is very expensive. You could build a large trash fire, and slowly feed the contaminated soil in, which will do a pretty good job. If this ever happens to me, I probably will go this route. I'm not sure it's legal, but I would consider removing the worst dirt and spreading it far from the house, over a large area, which would accelerate the breakdown. Over a large area, any subsequent testing would not find any problem. In California, I'm sure this would be frowned upon. But as I said, small spills can be ignored. Replace with uncontaminated dirt. However, be sure to let the fuel company know this is the last mistake, or build a container around the tank to catch any spills as was suggested. It could require some effort on your part, and it depends on how much you like the fuel supplier. I personally don't like to use a heavy hand and slap someone whom makes a manageable mistake the first time. In my opinion, calling or threatening to call the authorities immediately, is just as bad as yelling, "I'm going to sue" for any small infraction. A more Christian attitude seems to be the better play.
Follow Ups:
Home
| Forums
Today's Featured Article -
Grain Threshing in the Early 40's - by Jerry D. Coleman. How many of you can sit there and say that you have plowed with a mule? Well I would say not many, but maybe a few. This story is about the day my Grandfather Brown (true name) decided along with my parents to purchase a new Ford tractor. It wasn't really new except to us. The year was about 1967 and my father found a good used Ford 601 tractor to use on the farm instead of "Bob", our old mule. Now my grandfather had had this mule since the mid 40's and he was getting some age on him. S
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|