|
Tractor Talk Discussion Board |
Re: Tulsa winch part
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by n9lhm on December 30, 2005 at 06:25:41 from (69.48.41.2):
In Reply to: Re: Tulsa winch part posted by geok on December 29, 2005 at 19:56:20:
The number on the casting is 387. The ID is 2 1/4", with (2) 1/2" keyways 180 degrees apart. The diameter of the "ears" that engage the drum is 5 1/4". The diameter of the main casting is approx. 3 5/8". The width of the groove that the clutch fingers ride in is 5/8". The overall length of the part is 2 1/2". I don"t know whether this part is used on other winches or not. Thanks in advance for all the help -- Brian P.S. I tried AW Direct but they say they don"t have anything for Tulsa winches. I appreciate the lead, though.
Replies:
Home
| Forums
Today's Featured Article -
Tuning-Up Your Tractor: Plugs & Compression Testing - by Curtis Von Fange. The engine seems to run rough. In the exhaust you can hear an occasion 'poofing' sound like somethings not firing on all cylinders. Under loaded conditions the tractor seems to lack power and it belches black smoke out of the exhaust. For some reason it just doesn't want to start up without cranking and cranking the starter. All these conditions can be signals that your unit is in need of a tune up. Ok, so what is involved in a tune up? You say, swap plugs and file the points....now tha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
