Re: 1070 case

Posted by Can't even use my name on March 09, 2006 at 16:18:22 from (216.241.134.40):

In Reply to: 1070 case posted by rboulware on March 09, 2006 at 09:38:55:

I really wouldn't worry about it myself. Then again I can take one out and rebuild it myself. We have run Case powershifts for as long as I can remember (I'm 26 now). Been through 6 1070's with three still in use. Only two had a tranny problems, one was just plain wore out with over 5000 hours. Used that tractor to pull a 6 bottom Case moldboard so really that doesn't seem too bad. The other just last year with 3000 hours sheared the 6 3/8 bolts that hold the clutch pack together, all else in there was fine.Have two 1270's and only one was split with 3000 hours. Did the same thing the 1070 did, sheared off the 3/8 bolts. Got a clutch pack from a 94 series and put 1/2 bolts in her, used for planting so she does a lot of shifting! Never have that problem again. Other 1270 has over 12000 hours of hard hard use. Third motor but original powershift. And we have a 2390 (my personal tractor) with 6600 hours and has the original motor and powershift. So I'd say that in our experience those powershifts are pretty darn tough. Just change the oil and filters and let them warm up before jamming gears.

Replies:

• Re: 1070 case JDknut 15:52:14 03/10/06 (1)
  • Re: 1070 case Can't even use my name 16:47:48 03/10/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]