Re: 1070 case transmission

Posted by c hess on March 09, 2006 at 18:46:01 from (69.88.209.237):

In Reply to: 1070 case transmission posted by Evert Vankammen on March 08, 2006 at 19:47:05:

Book says c2 clutches might be warped orinching spool not adjuster correctly. I assume you are idling when you push clutch in an tractor is warm. Since these tractors are getting old i would remove floor plate an make sure cable is moving freely an little cast piece is not binding on its pivot than with tractor stopped move power shift back an forth an check if valve is moving in its different positions corectly. I believe each position will be held by a detent. This you can do before you need to spend money at dealer.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]