Re: At wits end trying to start 8n

Posted by Jerry Cent. Mi. on May 07, 2006 at 15:35:02 from (207.200.116.14):

In Reply to: At wits end trying to start 8n posted by monomechanical on May 06, 2006 at 20:42:47:

Have you wiped out your dist. cap? We farmed with one of them when I was young and if I remember right the Dist. runs off the front end of the cam and when the bearing wears it allows crankcase vapors into the Dist. and it coats the inside of the cap. The vapor draws moisture and shorts out the spark. Try a new cap or wipe it out with laquer thiner. Their is a resister under the hood behind the panel that holds the gauges that go's bad quite often. Short accross it and see if it helps. I was always able to do it with a screw drive. Good luck. Jerry

Replies:

• Complete Humiliation. monomechanical 16:10:19 05/07/06 (1)
  • Re: Complete Humiliation. buickanddeere 20:53:47 05/07/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]