Tractor Talk Discussion Board |
Advise Please: Using non-power beyond hyd valves.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by AmeriKen on September 08, 2006 at 19:00:59 from (70.217.238.154):
I am attempting to install a CASE 580CK backhoe onto a Ford 555 industrial loader tractor. After studying the hydraluic diagrams, I discovered that neither the loader valve nor the backhoe gang of valves has power beyond capability. If it was a Ford tractor with a Ford backhoe, the power beyond would be on the backhoe, If it was a CASE 580CK with a CASE backhoe, the power beyond is in the loader valve. I got blind-sided on this project, and was expecting the power beyond capability on the backhoe gang valves in the same manner as it is on my older CASE 420B backhoe that has been installed on my Massey Ferguson 50A. This set up was easy because I routed the line from the pump to the backhoe, first, then ran the outlet hose to the loader valve on the Massey. Does anyone have suggestions as to what I can do to make the Ford tractor/loader compatible with the CASE 580CK backhoe? How does someone plumb two valves in series that neither has power beyond capabilty? Thanks, in advance. Ken McWilliams Dayton, OH
Replies:
Home
| Forums
Today's Featured Article -
The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|