Re: Hydraulics: Question 2

Posted by 135 Fan on October 31, 2006 at 17:10:59 from (68.149.51.133):

In Reply to: Re: Hydraulics: Question 2 posted by Allan In NE on October 31, 2006 at 16:48:36:

As long as you have the right pressure it should work but will be slower. I assume both are open center center hydraulics. I'd worry about if you had enough oil left to lube the tranny when the loader is up. Those cylinders are pretty long. Just a thought. If you are worried about a hose blowing on a valve in the cab, put some 4 wire hoses on. They're good for over 4000 psi and hoses have a 3 to 1 safety factor. You can also buy sleeves that go over the hose to stop abrasion and contain any leaks. Hope this helps. Dave

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]